M25P40-VMN6TPB Description
The M25P40-VMN6TPB from Micron Technology is a serial flash embedded memory unit with 4MB memory capacity and a maximum clock frequency of 75MHz. It uses a 2.3-3.6V single supply voltage and a deep power-down state of 1µA. The M25P40-VMN6TPB offers an industrial-grade operating temperature range of –40 to +85°C and a RoHS-compliant packaging.
M25P40-VMN6TPB Application
Embedded systems:
M25P40-VMN6TPB is widely used in embedded systems to store key information such as firmware, configuration data, logs, etc.
Its high-speed SPI communication protocol enables fast reading and writing of data in these systems.
Network communication equipment:
Due to its high performance and reliability, this type of chip is commonly found in network equipment such as routers,
switches and communication modules, used to store operating systems, configuration information and firmware updates.
Consumer Electronics:
In consumer electronics, such as smart TVs, sound systems, game consoles, etc.,
the M25P40-VMN6TPB can be used to store application code, media files, and other related data.
Industrial Control Systems:
Due to its reliability and durability, this flash memory chip plays an important role in industrial control systems
for storing control programs, configuration files, and operation logs.
Automotive electronic systems:
In automotive electronics, the M25P40-VMN6TPB may be used to store vehicle control unit (ECU) firmware,
vehicle configuration information, and other critical data.
M25P40-VMN6TPB Technical Specifications
| Part Status | Obsolete |
| HTS | 8542.32.00.71 |
| Automotive | No |
| PPAP | No |
| Cell Type | NOR |
| Chip Density (bit) | 4M |
| Architecture | Sectored |
| Boot Block | No |
| Block Organization | Symmetrical |
| Address Bus Width (bit) | 1 |
| Sector Size | 64Kbyte x 8 |
| Page Size | 256byte |
| Number of Bits/Word (bit) | 8 |
| Number of Words | 512K |
| Programmability | Yes |
| Timing Type | Synchronous |
| Max. Access Time (ns) | 8 |
| Maximum Erase Time (s) | 10/Chip |
| Maximum Programming Time (ms) | 5/Page |
| Process Technology | 110nm |
| Interface Type | Serial-SPI |
| Minimum Operating Supply Voltage (V) | 2.3 |
| Maximum Operating Frequency (MHz) | 75 |
| Typical Operating Supply Voltage (V) | 2.5|3|3.3 |
| Maximum Operating Supply Voltage (V) | 3.6 |
| Programming Voltage (V) | 2.3 to 3.6 |
| Operating Current (mA) | 8 |
| Program Current (mA) | 15 |
| Minimum Operating Temperature (°C) | -40 |
| Maximum Operating Temperature (°C) | 85 |
| Supplier Temperature Grade | Industrial |
| Command Compatible | Yes |
| ECC Support | No |
| Support of Page Mode | No |
| Minimum Endurance (Cycles) | 100000 |
| Packaging | Tape and Reel |
| Mounting | Surface Mount |
| Package Height | 1.5(Max) |
| Package Width | 3.9 |
| Package Length | 4.9 |
| PCB changed | 8 |
| Standard Package Name | SO |
| Supplier Package | SOIC N |
| Pin Count | 8 |
| Lead Shape | Gull-wing |
