The world's largest supply platform for sources of shortages and hard-to-find parts

max96774gtm/v+ Analog Devices / Maxim Integrated

Published Time: 2024-01-11 10:34:46
max96774gtm/v+ Serializers & Deserializers - Serdes 3.12Gbps GMSL Serializers for Coax or STP Output Drive and LVDS Input

Specifications

MAX96774GTM.webp

Product AttributeAttribute Value
Manufacturer:Analog Devices Inc.
Product Category:Serializers & Deserializers - Serdes
RoHS: Details
Package / Case:TQFN-48
Qualification:AEC-Q100
Packaging:Reel
Packaging:Cut Tape
Brand:Analog Devices / Maxim Integrated
Product Type:Serializers & Deserializers - Serdes
Series:MAX9277
Factory Pack Quantity:260
Subcategory:Interface ICs
Part # Aliases:MAX9277
Unit Weight:0.004668 oz


General Description 

The MAX9277/MAX9281 are 3.12Gbps Gigabit Multimedia Serial Link (GMSL) serializers with 3- or 4-data lane LVDS input (oLDI) and a CML serial output programmable for 50Ω coax or 100Ω shielded twisted pair (STP) cable drive. The MAX9281 has HDCP content protection but otherwise is the same as the MAX9277. The serializers pair with any GMSL deserializer capable of coax input. When programmed for STP output they are backward compatible with any GMSL deserializer. The output amplitude is programmable 100mV to 500mV single-ended (coax) or 100mV to 400mV differential (STP). 

The audio channel supports L-PCM I2S stereo and up to 8 channels of L-PCM in TDM mode. Sample rates of 32kHz to 192kHz are supported with sample depth up to 32 bits.

The embedded control channel operates at 9.6kbps to 1Mbps in UART-UART and UART-I2C modes, and up to 1Mbps in I2C-I2C mode. Using the control channel, a µC can program serializer, deserializer and peripheral device registers at any time, independent of video timing, and manage HDCP operation (MAX9281). A GPO output supports touch-screen controller interrupt requests from the remote end of the link. 

For use with longer cables, the serializers have programmable pre/deemphasis. Programmable spread spectrum is available on the serial output. The serial output meets ISO 10605 and IEC61000-4-2 ESD standards. The core supply is 1.7 to 1.9V and the I/O supply is 1.7 to 3.6V. The package is a lead-free, 48-pin, 7mm x 7mm TQFN with exposed pad, optional wettable flanks, and 0.5mm lead pitch.


Applications 

● High-Resolution Automotive Navigation 

● Rear-Seat Infotainment 

● Megapixel Camera Systems




More Products Hot Selling

MT29F4G08ABADAH4-IT:D
Memory IC
MT29F4G08ABADAH4-IT:D
4Gb, 8Gb, 16Gb: x8, x16 NAND Flash Memory Features MT29F4G08ABADAH4, MT29F4G08ABADAWP, MT29F4G08ABBDAH4, MT29F4G08ABBDAHC, MT29F4G16ABADAH4, MT29F4G16ABADAWP, MT29F4G16ABBDAH4, MT29F4G16ABBDAHC, MT29F8G08ADADAH4, MT29F8G08ADBDAH4, MT29F8G16ADADAH4, MT29F8G16ADBDAH4, MT29F16G08AJADAWP
MT29F2G08ABAEAWP:E
Memory IC
MT29F2G08ABAEAWP:E
2Gb: x8, x16 NAND Flash Memory Features
LDC1101DRCR
Data Acquisition - ADCs/DACs - Special Purpose
LDC1101DRCR
LDC1101 1.8V High Resolution, High Speed Inductance to Digital Converter
TCAN1042GVDRBRQ1
Interface - Drivers, Receivers, Transceivers
TCAN1042GVDRBRQ1
TCAN1042-Q1 Automotive Fault Protected CAN Transceiver with CAN FD CAN 5Mbps Normal/Standby 5V Automotive 8-Pin VSON EP T/R
MAX4651ESE-T
Interface - Analog Switches
MAX4651ESE-T
Analog Switch ICs Low-Voltage, 4 Ohm, Quad, SPST, CMOS Analog Switches,DC 22+
TMP114AIYMTR
Temperature Sensors - Analog and Digital Output
TMP114AIYMTR
TMP114 Ultra-Thin, 1.2-V to 1.8-V Supply, High Accuracy Digital Temperature Sensor with I2C Interface
LM74700QDBVRQ1
PMIC - OR Controllers, Ideal Diodes
LM74700QDBVRQ1
LM74700-Q1 Low IQ Reverse Battery Protection Ideal Diode Controller

Recommended Parts